Conveying Equipment
Belt and screw conveyors for moving discharged filter cake and granular material from the filter press into the next handling stage.
CAKE HANDLING · ZHIZUN
Conveying Options for the Actual Duty
Compare the available configurations, then confirm the final selection against the process and installed filter press.
Anti-corrosion and wear-resistant construction
Filter Cake Belt Conveyor
Receives filter cake discharged from the press and transfers it outward in horizontal or inclined installations.
- Cake discharge
- Horizontal transfer
- Inclined transfer
- Filter press outlets
Cake dischargeCompatible: Filter presses requiring cake collection and outward transfer.
Selection note: Confirm transfer direction and installation geometry against the site layout.
304 stainless steel optional
Shafted Screw Conveyor
Shafted screw conveyor for transporting filter cake and granular material from the discharge area.
- Filter cake
- Granular material
- Controlled conveying
- 304 stainless option
Compatible: Filter press cake discharge and material transfer routes.
Selection note: Confirm the transfer route and required material construction for the process.
304 stainless steel optional
Shaftless Screw Conveyor
Shaftless screw conveyor for filter cake and granular material with an anti-clogging design.
- Cake handling
- Granular material
- Anti-clogging transfer
- 304 stainless option
Compatible: Filter press discharge points and integrated sludge-hopper systems.
Selection note: Confirm the screw configuration and interface with the downstream collection or transport system.
Confirm conveyor type, installation direction, material construction and interfaces against the discharged cake and site layout.
Plan the Cake Route from the Press Downstream
Choose conveyor type and arrangement around the discharged material, horizontal or inclined route, and the collection or transport equipment below the press.
Discuss your applicationDischarge Direction
Use horizontal or inclined belt transfer to suit the available route.
Material Form
Match the conveyor to filter cake and any granular material handled.
Clogging Risk
Select shafted or shaftless screw configuration around the material-handling need.
Material Construction
Specify 304 stainless steel where the supported configuration and process require it.
From Cake Discharge to Transfer
Conveying equipment receives material beneath the press and creates a controlled path to storage, loading or the next process stage.
Receiving Zone
Belt conveyors receive cake released from the press.
Belt Route
Horizontal and inclined installation options fit different site layouts.
Screw Transport
Shafted and shaftless conveyors move cake and granular material.
System Interface
Conveyors can connect with sludge hoppers and downstream handling.
Connect Discharge to the Material-Handling Line
Conveyors can be supplied with collection and hopper systems to reduce manual cake handling around the press.
Filter Press Discharge
Receives cake as plates open and release material.
Check compatibilitySludge Hopper
Transfers collected cake from a hopper to the next handling stage.
Check compatibilityAutomatic Washing
Works beneath systems where washing wastewater and cake must be separated.
Check compatibilityMatched to the Material and Industry
The final accessory configuration follows the material, operating environment and complete separation process.
Mining & Sand Washing
Moves abrasive mineral and sand-washing filter cake.
View solution
Chemical Processing
Transfers dewatered chemical-process material from the press.
View solution
Wastewater Treatment
Handles municipal and industrial sludge cake after dewatering.
View solutionStone Processing
Transfers stone-cutting sludge cake from the discharge area.
View solutionGET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate
+86 131 8908 7065ENGINEER RESPONSE WITHIN 24 HOURS
Request a Project Proposal
Required fields are marked with an asterisk.
GET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate