Multi-Disc Screw Press

Integrated sludge thickening and dewatering with a screw shaft, fixed rings and moving rings.

Request Model Selection View Model Range

Multi-Disc Screw Press · ZHIZUN

Models & Specifications

Compare the published equipment families and reference parameters for your process.

HNDL 130 Screw Press

The published single-shaft 130 family.

Published model: 1
Screw specification: 130 × 1
Net weight: 205 kg

HNDL 130 screw press plan view — Plan View

HNDL 130 screw press end views — End Views

HNDL 130 screw press first side elevation — Side Elevation A

HNDL 130 screw press second side elevation — Side Elevation B

Approximate reference treatment values. Motor and blender units are not printed in the source table; confirm them with the supplier. The shared brochure drawing illustrates the 300-family layout.

HNDL 130 Screw Press — Product Parameters
Model	Dry solids: low concentration (kg/h)	Dry solids: high concentration (kg/h)	Sludge at 2000 mg/L (m³/h)	Sludge at 5000 mg/L (m³/h)	Sludge at 10000 mg/L (m³/h)	Sludge at 20000 mg/L (m³/h)	Sludge at 25000 mg/L (m³/h)	Sludge at 50000 mg/L (m³/h)	Water treating volume (m³/h)	Blender (published value)	Motor power (published value)	Screw shaft specification	Cake outlet height (published value)	Length (mm)	Width (mm)	Height (mm)	Net weight (kg)
HNDL-131	~6	~10	~3.5	~1.4	~1.0	~0.5	~0.4	~0.2	1	0.37	0.4	130 × 1	260	1978	725	1130	205

HNDL 200 Screw Press

One- and two-shaft configurations in the 200 family.

Published models: 2
Screw specification: 200 × 1-2
Net weight: 320-470 kg

HNDL 200 screw press plan view — Plan View

HNDL 200 screw press end views — End Views

HNDL 200 screw press first side elevation — Side Elevation A

HNDL 200 screw press second side elevation — Side Elevation B

Approximate reference treatment values. Motor and blender units are not printed in the source table; confirm them with the supplier. The shared brochure drawing illustrates the 300-family layout.

HNDL 200 Screw Press — Product Parameters
Model	Dry solids: low concentration (kg/h)	Dry solids: high concentration (kg/h)	Sludge at 2000 mg/L (m³/h)	Sludge at 5000 mg/L (m³/h)	Sludge at 10000 mg/L (m³/h)	Sludge at 20000 mg/L (m³/h)	Sludge at 25000 mg/L (m³/h)	Sludge at 50000 mg/L (m³/h)	Water treating volume (m³/h)	Blender (published value)	Motor power (published value)	Screw shaft specification	Cake outlet height (published value)	Length (mm)	Width (mm)	Height (mm)	Net weight (kg)
HNDL-201	~9	~15	~4.5	~1.8	~1.5	~0.7	~0.6	~0.3	2	0.37	0.4	200 × 1	500	2500	800	1450	320
HNDL-202	~20	~30	~10.0	~4.0	~3.0	~1.5	~1.2	~0.6	4	0.37	0.4 × 2	200 × 2	500	2500	935	1270	470

HNDL 300 Screw Press

One-, two- and three-shaft configurations in the 300 family.

Published models: 3
Screw specification: 300 × 1-3
Cake outlet height: 680

HNDL 300 screw press plan view — Plan View

HNDL 300 screw press end views — End Views

HNDL 300 screw press first side elevation — Side Elevation A

HNDL 300 screw press second side elevation — Side Elevation B

Approximate reference treatment values. Motor and blender units are not printed in the source table; confirm them with the supplier. Drawing dimensions are illustrative and differ from some tabulated dimensions.

HNDL 300 Screw Press — Product Parameters
Model	Dry solids: low concentration (kg/h)	Dry solids: high concentration (kg/h)	Sludge at 2000 mg/L (m³/h)	Sludge at 5000 mg/L (m³/h)	Sludge at 10000 mg/L (m³/h)	Sludge at 20000 mg/L (m³/h)	Sludge at 25000 mg/L (m³/h)	Sludge at 50000 mg/L (m³/h)	Water treating volume (m³/h)	Blender (published value)	Motor power (published value)	Screw shaft specification	Cake outlet height (published value)	Length (mm)	Width (mm)	Height (mm)	Net weight (kg)
HNDL-301	~40	~60	~19.0	~7.6	~6.0	~3.0	~2.4	~1.2	5	0.55	0.75	300 × 1	680	3010	815	1766	820
HNDL-302	~75	~120	~37	~15	~12	~6.0	~4.8	~2.4	10	0.55	0.75 × 2	300 × 2	680	3303	1200	1766	1350
HNDL-303	~115	~175	~58	~23	~18	~9.0	~7.0	~3.5	15	0.75	0.75 × 3	300 × 3	680	3605	1690	1600	1820

HNDL 400 Screw Press

One- through four-shaft configurations in the 400 family.

Published models: 4
Screw specification: 400 × 1-4
Net weight: 2280-8040 kg

HNDL 400 screw press plan view — Plan View

HNDL 400 screw press end views — End Views

HNDL 400 screw press first side elevation — Side Elevation A

HNDL 400 screw press second side elevation — Side Elevation B

Approximate reference treatment values. Motor and blender units are not printed in the source table; confirm them with the supplier. The shared brochure drawing illustrates the 300-family layout.

HNDL 400 Screw Press — Product Parameters
Model	Dry solids: low concentration (kg/h)	Dry solids: high concentration (kg/h)	Sludge at 2000 mg/L (m³/h)	Sludge at 5000 mg/L (m³/h)	Sludge at 10000 mg/L (m³/h)	Sludge at 20000 mg/L (m³/h)	Sludge at 25000 mg/L (m³/h)	Sludge at 50000 mg/L (m³/h)	Water treating volume (m³/h)	Blender (published value)	Motor power (published value)	Screw shaft specification	Cake outlet height (published value)	Length (mm)	Width (mm)	Height (mm)	Net weight (kg)
HNDL-401	~95	~150	~48	~19	~15	~7.5	~6	~3.0	15	0.75	1.5 + 0.75	400 × 1	690	3745	930	2040	2280
HNDL-402	~185	~310	~92	~37	~30	~15	~12.5	~6.0	30	0.75	3 + 0.75	400 × 2	700	4160	1440	2040	3740
HNDL-403	~285	~450	~142	~57	~45	~22	~18	~9.0	45	1.5	4.5 + 0.75	400 × 3	690	5030	2050	3785	6020
HNDL-404	~365	~610	~182	~73	~61	~30	~24	~12	60	1.1 × 2	6 + 1.5	400 × 4	690	5170	2600	4960	8040

Working Principle

Integrated sludge thickening and dewatering with a screw shaft, fixed rings and moving rings.

Meter & Flocculate
A metering tank controls incoming sludge before mixing it with polymer in the flocculation tank.
Thicken the Sludge
Gravity drainage removes liquid in the first section of the screw body.
Build Compression
The screw pitch and filtration gaps decrease towards the discharge end, increasing compression.
Discharge the Cake
The back-pressure plate supports final compression before cake leaves the outlet; moving rings clean the filtration gaps.