01CONTINUOUS DUTY
Belt Filter Press
Continuous gravity drainage and pressing for stable municipal or industrial sludge flow.
Environmental & Wastewater Treatment Solutions
Reduce Sludge Volume.Recover More Water.
Reliable sludge thickening, dewatering and handling systems for municipal and industrial wastewater facilities.
ENGINEERED FORMunicipal Sludge · Industrial Effluent · Water Reuse
Project Challenge
Sludge characteristics change, but the dewatering line still has to perform every shift.
Biological sludge, mixed industrial solids and variable hydraulic loading require a process-led equipment selection. Zhizun integrates conditioning, dewatering and cake handling around the plant duty.
- 01Variable sludge concentration and organic content
- 02High transport and disposal cost from excess water
- 03Limited operator attention and continuous-duty requirements
- 04Filtrate return, odor and housekeeping constraints
Recommended Process Flow
A practical route from process slurry to controlled separation.
The recommended route is adjusted for sludge type, plant capacity and the final cake destination.
- 01Sludge FeedWaste activated, primary or industrial sludge enters the treatment train.
- 02Polymer PreparationAutomated dosing prepares floc structure for efficient water release.
- 03ThickeningFree water is removed and solids concentration is stabilized.
- 04DewateringBelt, screw or pressure filtration produces a manageable sludge cake.
- 05Filtrate ReturnSeparated water returns to headworks or a reuse-treatment stage.
- 06Cake TransferConveying, storage or loading is matched to the disposal route.
Equipment Configuration
Build the line around the material, duty and result.
Continuous and batch dewatering options are compared against solids loading, target cake and staffing levels.
01
02LOW-MAINTENANCE
Multi-Disc Screw Press
Compact low-speed dewatering for variable loading and unattended operation.
03LOWER CAKE MOISTURE
Membrane Filter Press
Batch pressure filtration when disposal reduction requires a drier cake.
04PLANT INTEGRATION
Thickening & Sludge Collection
Scraping, thickening and transfer equipment configured for the existing civil works.
Target Results
Turn separation requirements into measurable process outcomes.
The design targets the operating cost and plant conditions that matter after commissioning.
Get a Process Proposal →Customization Steps
Engineering support from first data to site start-up.
Process Data Review
We confirm feed composition, solids loading, capacity and the required discharge result.
Bench or Pilot Validation
Representative material is tested when filtration behavior or chemical compatibility needs proof.
System Engineering
Equipment, auxiliaries, controls and layout are configured as one practical treatment line.
Delivery & Start-Up
Drawings, FAT records, operating guidance and commissioning support prepare the site team.
WASTEWATER CASERelated Cases
Municipal Sludge Dewatering Project
A continuous dewatering line configured for changing biological sludge loads and practical operator control.
- Application
- Municipal biological sludge
- Solution
- Continuous sludge dewatering line
- Focus
- Volume reduction and stable operation
GET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate
+86 131 8908 7065ENGINEER RESPONSE WITHIN 24 HOURS
Request a Project Proposal
Required fields are marked with an asterisk.
GET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate