Filter Press Cloth
PP, PET and monofilament filter cloth tailored to slurry properties, filtration precision and press geometry for reliable drainage and cake release.
FILTRATION MEDIA · ZHIZUN
Filter Cloth Options for the Actual Duty
Compare the available configurations, then confirm the final selection against the process and installed filter press.
Polypropylene (PP) multifilament
Polypropylene Multifilament Filter Cloth
Hydrophilic, acid-alkali-resistant cloth for corrosive and high-moisture sludge where fast drainage and non-stick release are important.
- Corrosive sludge
- High-moisture material
- Fast drainage
- Acid and alkali duty
Corrosive sludgeCompatible: Plate-and-frame, chamber and diaphragm filter presses.
Selection note: Not suitable for high-temperature environments. Mesh count is a reference only; confirm actual tested micron precision.
Polyester (PET) multifilament
Polyester Multifilament Filter Cloth
High-tensile, wear-resistant and heat-resistant cloth for frequent, high-pressure squeezing cycles and a long service life.
- Frequent cycles
- High-pressure squeezing
- Wear resistance
- Heat resistance
Compatible: Plate-and-frame, chamber and diaphragm filter presses.
Selection note: Confirm actual tested micron precision for the supplied weave rather than selecting from a metal-sieve mesh conversion table.
Polypropylene (PP) or polyester (PET) monofilament
PP or PET Monofilament Filter Cloth
Smooth monofilament yarn construction resists material retention, simplifies washing and supports complete cake release for fine filtration.
- Fine chemical filtration
- Clean-water treatment
- Easy washing
- Complete cake release
Compatible: Plate-and-frame, chamber and diaphragm filter presses.
Selection note: Choose material and precision from slurry concentration, particle fineness and working pressure; special specifications are available on request.
Mesh count is a reference only: woven-cloth pore size varies with yarn type and weave. Confirm actual tested micron precision and batch-specific air permeability before final selection.
Select Cloth by the Actual Filtration Duty
Choose the fibre, weave and construction around slurry chemistry, particle size, filtration pressure and the required drainage and cake-release behaviour.
Discuss your applicationSlurry Chemistry
Match PP or PET resistance to acid, alkali, heat and the process medium.
Tested Precision
Use the supplied cloth's measured micron precision, not a metal-test-sieve mesh table.
Drainage Requirement
Balance mesh and weave density against permeability, cycle time and clogging risk.
Press Geometry
Confirm cloth size, cutting, edge stitching and plate layout against the installed press.
Woven for Drainage and Cake Release
The yarn type and weaving structure determine filtration precision, permeability, washability and release performance. Cloth is supplied to suit the press and process rather than a one-size-fits-all mesh number.
Fibre Selection
PP and PET options support different chemical, temperature and mechanical requirements.
Weave Construction
Multifilament and monofilament constructions serve different drainage and release needs.
Custom Fabrication
Density, thickness, colour, dimensions, special cutting and edge stitching are configurable.
Measured References
Factory-tested precision and air permeability guide selection and remain batch-dependent.
Matched to the Complete Filter Press
Filter cloth is cut and finished to work with the plate pack, feed route and cake-discharge process of the target press.
Plate & Frame Press
Cloth dimensions and seams are matched to the plate-and-frame arrangement.
Check compatibilityChamber & Diaphragm Press
Cloth construction is selected around chamber filling and squeezing cycles.
Check compatibilityCloth Washing System
Wash pressure and nozzle layout must protect the selected cloth material.
Check compatibilityMatched to the Material and Industry
The final accessory configuration follows the material, operating environment and complete separation process.
Mining & Sand Washing
Wear-resistant filtration media for mineral and sand-washing slurry.
View solution
Chemical Processing
Material and weave selection matched to corrosion and filtration precision.
View solution
Food & Pharmaceutical
Fine filtration media for controlled processing applications.
View solution
Wastewater Treatment
Cloth selection for municipal and industrial sludge dewatering.
View solutionGET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate
+86 131 8908 7065ENGINEER RESPONSE WITHIN 24 HOURS
Request a Project Proposal
Required fields are marked with an asterisk.
GET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate