Filter Press Plate
Polypropylene filter plates matched to slurry chemistry, operating pressure, hygiene requirements and your existing press configuration.
100% VIRGIN PP OPTION · ZHIZUNTwo PP Plate Options. One Process-Led Choice.
Compare material grade and duty range first, then confirm the exact geometry against your filter press.
New PP material with standard fillers
Standard Grey Polypropylene
A cost-conscious plate for sand washing, mining and general industrial sludge under moderate chemical conditions.
- Sand washing and mining slurry
- General industrial sludge
- Moderate acid and alkali duty
- Budget-sensitive replacement programs
Compatible: Plate and frame, chamber and diaphragm filter presses
100% virgin polypropylene without filler additives
Heavy-Duty Food-Grade White
A reinforced high-pressure option for hygienic, fine-chemical and corrosive duties where material purity matters.
- Food and pharmaceutical processing
- Fine chemical production
- Highly corrosive slurry
- Longer service-life priorities
Compatible: Plate and frame, chamber and diaphragm filter presses
Published values are selection references from the supplied product document. Final plate construction must be confirmed against the press model, slurry data and operating conditions.
Select by Duty, Not Color Alone.
Plate material is only one part of the decision. Pressure, slurry behavior, hygiene and machine geometry must be reviewed together.
Send your press detailsSlurry Chemistry
Review pH, corrosiveness and any solvent or additive exposure before selecting the plate grade.
Operating Pressure
Match the plate construction to the press closing system, feed pressure and squeezing duty.
Hygiene Requirement
Use virgin material where food, pharmaceutical or low-leaching process conditions require it.
Press Compatibility
Confirm plate size, thickness, feed position, handle geometry and filtrate arrangement against the machine.
Plate Details That Must Match.
Replacement accuracy depends on more than overall dimensions. Send photos, old plate markings and a measured drawing when available.
Sealing Face
The perimeter must match the plate pack and cloth arrangement for stable chamber sealing.
Drainage Surface
Raised points support the filter cloth and guide filtrate toward the outlet channels.
Feed Port
Corner-feed and center-feed layouts are selected to match the existing press and slurry route.
Plate Handle
Handle geometry and mounting position must suit the side bars and plate-shifting system.
Compatible Filter Press Types
Zhizun reviews plate geometry and operating duty for new equipment and replacement plate packs.
Plate & Frame Press
Plate dimensions and port layout matched to the existing plate-and-frame pack.
Check compatibilityChamber Filter Press
Recess depth and chamber thickness selected around cake volume and discharge behavior.
Check compatibilityDiaphragm Filter Press
Plate compatibility reviewed against membrane squeezing pressure and cycle configuration.
Check compatibilityMatched to the Material and Industry
The final plate grade and configuration depend on both the slurry and the production environment.
Mining & Sand Washing
Robust plate selection for abrasive mineral and sand-washing slurry.
View solution
Chemical Processing
Material selection based on slurry chemistry and corrosion exposure.
View solution
Food & Pharmaceutical
Virgin white PP for hygiene-sensitive and controlled process duties.
View solution
Wastewater Treatment
Matched replacements for municipal and industrial sludge dewatering.
View solutionGET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate
Application review by an engineer
+86 131 8908 7065ENGINEER RESPONSE WITHIN 24 HOURS
Request a Project Proposal
Required fields are marked with an asterisk.
GET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate