Liquid Collection & Sludge Hopper System
Under-press liquid and cake collection that separates filtrate and washing water from discharged sludge for a cleaner automated dewatering line.
UNDER-PRESS COLLECTION · ZHIZUN
Collection & Hopper Options for the Actual Duty
Compare the available configurations, then confirm the final selection against the process and installed filter press.
Material selected for filtrate characteristics
Liquid Collection Plate / Drip Tray
Collects filtrate, washing wastewater and small amounts of falling sludge beneath the press during filtration, discharge and cloth washing.
- Filtration drips
- Washing wastewater
- Cleaner floor area
- Corrosion-conscious collection
Filtration dripsCompatible: Plate-and-frame, chamber and diaphragm filter presses.
Selection note: Design around press length, plate quantity, clearance, liquid direction, drainage outlet and wastewater path to avoid accumulation, overflow and blockage.
Custom structural material and discharge interface
Sludge Hopper
Temporarily collects discharged filter cake for centralized transfer and can connect to gates or conveyors for automated discharge.
- Centralized cake collection
- Continuous transfer
- Large cake output
- Automated discharge
Compatible: Filter press discharge systems and downstream conveying equipment.
Selection note: Match volume to one discharge batch. For wet or sticky sludge, consider a steeper hopper angle or an anti-bridging device.
Confirm length, width, volume, material, discharge method and interfaces against the press, filtrate, cake output and site space before final fabrication.
Customize the Collection Space Beneath the Press
Design this system around press length, plate count, cake output, filtrate properties, available clearance and the route for liquid and cake discharge.
Discuss your applicationPress Footprint
Match the collection plate and hopper to press dimensions and lower clearance.
Liquid Route
Set the drainage direction and outlet position to avoid pooling and overflow.
Cake Volume
Size hopper capacity to the cake quantity released in each cycle.
Discharge Interface
Choose gate and conveyor integration around the required downstream transfer.
Separate Liquid and Sludge at the Source
The collection plate catches liquid under the press while the hopper centralizes cake discharge, reducing floor contamination and manual cleanup.
Collection Plate
Receives drips and washing wastewater beneath the press.
Sludge Hopper
Concentrates cake for controlled discharge and transfer.
Drainage Route
Directs liquid to a planned outlet and downstream collection.
Conveyor Interface
Connects cake handling to screw or belt conveyor equipment.
Combine Collection, Washing and Conveying
The system can be standalone or integrated with cloth washing, conveying and squeezing equipment as part of an automated dewatering line.
Cloth Washing System
Receives washing water and released sludge during cloth cleaning.
Check compatibilityConveying Equipment
Transfers collected cake from the hopper.
Check compatibilityFiltrate Collection Tank
Receives drainage from the liquid collection plate.
Check compatibilityMatched to the Material and Industry
The final accessory configuration follows the material, operating environment and complete separation process.
Chemical Processing
Corrosion-conscious collection beneath chemical-process presses.
View solution
Mining & Sand Washing
Collects wash water and mineral filter cake under the press.
View solution
Municipal Sludge
Centralizes sludge cake and improves the treatment-area environment.
View solutionWastewater Treatment
Separates liquid drainage and cake discharge for cleaner operations.
View solutionGET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate
+86 131 8908 7065ENGINEER RESPONSE WITHIN 24 HOURS
Request a Project Proposal
Required fields are marked with an asterisk.
GET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate