Pre-treatment Equipment
Upstream equipment that removes debris and sand, then pre-thickens sludge before it reaches the filter press and feed pump.
PROTECT AND CONDITION FEED · ZHIZUN
Pre-treatment Options for the Actual Duty
Compare the available configurations, then confirm the final selection against the process and installed filter press.
Rotary screening equipment
Rotary Bar Screen
Removes large debris and floating matter upstream to protect the filter press and pumps.
- Upstream protection
- Large debris
- Floating matter
- Pump protection
Upstream protectionCompatible: Filter press feed-preparation systems.
Selection note: Confirm screen placement as part of the upstream process route.
Sand-water separation equipment
Sand-Water Separator
Separates sand particles from slurry to reduce wear on filter plates and cloths.
- Sand-laden slurry
- Wear reduction
- Filter-cloth protection
- Plate protection
Compatible: Sand-washing and slurry pre-treatment routes.
Selection note: Confirm the separator duty against the sand content and upstream slurry route.
Sludge thickening tank
Deep Cone Thickener
Pre-thickens sludge to reduce the processing load placed on the filter press.
- Sludge concentration
- Reduced press load
- Feed conditioning
- Dewatering lines
Compatible: Sludge-treatment and filter press feed systems.
Selection note: Confirm the required pre-thickening duty for the target sludge process.
Select the upstream arrangement around debris, sand content and sludge concentration before confirming the filter press feed route.
Condition the Feed Before Dewatering
Arrange screening, sand separation and thickening around the upstream contaminants and feed condition that would otherwise reduce press and pump performance.
Discuss your applicationLarge Debris
Use a rotary bar screen to remove material that could damage downstream equipment.
Sand Content
Use a sand-water separator where abrasive sand threatens plates and cloth.
Sludge Concentration
Use a deep cone thickener to pre-concentrate sludge before press feeding.
Process Route
Confirm placement ahead of pumps and the target filter press.
Protect the Press Before the Feed Cycle
Pre-treatment removes or reduces the material characteristics that create avoidable wear, overload or difficult filtration downstream.
Screening
Removes large debris and floating matter.
Sand Removal
Separates abrasive sand from slurry.
Thickening
Pre-concentrates sludge before dewatering.
Downstream Protection
Helps protect filter presses, pumps, plates and cloth.
An Upstream Layer for the Dewatering System
These units are positioned before the press to condition feed and protect compatible pumping and filtration accessories.
Feed Pump
Screening helps protect the pump from coarse debris.
Check compatibilityFilter Cloth
Sand separation reduces abrasive wear on cloth.
Check compatibilityFilter Press
Thickening lowers the working load of the press.
Check compatibilityMatched to the Material and Industry
The final accessory configuration follows the material, operating environment and complete separation process.
Mining & Sand Washing
Separates sand and conditions mineral slurry before filtration.
View solution
Municipal Wastewater
Screens and pre-thickens sludge before dewatering.
View solution
Chemical Processing
Removes upstream debris and conditions chemical-process sludge.
View solutionRiver Dredging
Handles debris, sand and sludge before press feeding.
View solutionGET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate
+86 131 8908 7065ENGINEER RESPONSE WITHIN 24 HOURS
Request a Project Proposal
Required fields are marked with an asterisk.
GET A PROJECT PROPOSAL
Tell Us What You Need to Separate.
Share your material, capacity and target cake moisture. Our engineering team will respond with a practical equipment recommendation.
- Application review by an engineer
- Recommended model and process route
- Quotation and delivery estimate